| 李玉栋.木材点燃温度的测定[J].火灾科学,1992,1(1):26-30. |
| 木材点燃温度的测定 |
| Measurement of the ignition temperature of wood |
| 投稿时间：1992-05-20 |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| DOI：10.3969/j.issn.1004-5309.年.期.顺序 |
| 基金项目: |
|
| 中文关键词: 木材 点燃温度测定 |
| 英文关键词:Experimental ivestigation Ignition temperature Wood |
| 摘要点击次数: 1582 |
| 全文下载次数: 1988 |
| 中文摘要: |
| 本文叙述了在15-32KW/㎡辐射条件下对四种木材点燃性的研究，测定了木材（64×64×18mm）水平方向着火点（点燃状态形成）时的木材表面温度及点燃时间。结果表明：辐射强度等于或高于24KW/㎡时，可以较准确地测量木材的点燃温度，且此温度基本保持一致（±20℃）。辐射强度较低时，木材表观点燃温度大大高于辐射强度较高时的点燃温度，本文对这一现象进行了讨论。 |
| 英文摘要: |
| The experimental investigation about the ignition temperature of four species of wood,under radiant heat fluxes of 15~32kw/㎡is described,the surface temparature and time of ignition of horizontal samples(64×64×18mm)at the firepoint are measured.These data show that the ignition temperature could be measured more precisely when the heat fluxes is not lower that 24kw/㎡,and these temperatures could not shifted over ±20℃ generally.The phehomenon that the apparent firepoint temperature when the heat fluxes are not more than 24kw/㎡is much higher than that when the heat fluxes are larger is also discussed. |
| 关闭 |
